ComplyFlo Blog
Field-tested guidance on manifest tracking, regulatory reporting, surcharge billing, and the operations behind compliant waste facilities.
TCEQ wastewater operator license CEU requirements differ by license class — Class A operators need more hours than Class D — and failing to meet them means your license lapses befo
Read article →NetDMR hard errors vs soft errors explained for Texas WWTP operators: which ones block your DMR, how to clear each, and why validation isn’t accuracy.
Read article →The TCEQ TPDES permit renewal timeline in Texas wastewater plants follow requires submitting a renewal application at least 180 days before expiration — but most plants don't start
Read article →Your Texas compost facility annual report is due to TCEQ by November 10. See who files, which form to use, and what numbers to pull together now.
Read article →Texas grease trap regulations explained: who sets the rules, how often traps must be pumped, what haulers must hold, and what every trip ticket needs.
Read article →Found an error after submitting? Here’s how to correct a DMR in NetDMR, resubmit a late report, and keep the right records for TCEQ compliance.
Read article →Missing a TCEQ DMR deadline is a permit violation before any automated code appears. This guide explains when your TPDES DMR is due, how NetDMR tracks the date, and what late submi
Read article →The TCEQ MSW annual report due date is November 10 every year — and MSW facility operators who wait until October to start compiling a full fiscal year of waste data are already be
Read article →Learning how to fill out the TCEQ MSW annual report is a once-a-year scramble for most facility operators — and TCEQ's own form instructions aren't written for people doing it for
Read article →Getting chlorine dose calculation wastewater operators use for disinfection right is a balance between meeting your permit's TRC limit and not over-dosing to the point of dechlorin
Read article →The wastewater BOD removal efficiency formula — (Influent BOD minus Effluent CBOD) divided by Influent BOD times 100 — is the calculation your monthly DMR depends on most. This gui
Read article →Hydraulic retention time wastewater plants calculate from aeration volume and influent flow is one of the most fundamental process control numbers — and one of the most commonly mi
Read article →The RAS rate calculation wastewater operators use every day determines whether your MLSS stays in range — too low and the blanket rises, too high and you're diluting the basin. Thi
Read article →Solids retention time in wastewater operators calculate daily controls everything from nitrification to effluent TSS — yet most plants still run the math by hand in a spreadsheet.
Read article →Understand TCEQ compost facility requirements Texas operators must follow under 30 TAC Chapter 332 — including how the four authorization tiers work, which feedstocks trigger each
Read article →Learn how to digitize Texas sludge transporter trip tickets under 30 TAC § 312.145 — including what fields are required, when electronic signatures are allowed, how the 15-day retu
Read article →Most small plants make the move to digital parameter logging wastewater operators have been delaying not because paper is broken — but because re-entering the same readings twice e
Read article →A TPDES permit compliance checklist Texas wastewater plant operators can actually use covers five obligations your permit enforces every month — DMR submissions, parameter sampling
Read article →Texas FOG haulers must complete a trip ticket for every load. Here are the grease trap manifest requirements in Texas transporters need to stay compliant with TCEQ.
Read article →The sludge volume index formula — SVI = SV30 × 1,000 ÷ MLSS — is one of the most important daily process control calculations for activated sludge operators. This guide explains ho
Read article →The F/M ratio in activated sludge formula — (Influent Flow × Influent BOD) ÷ (Aeration Volume × MLVSS) — measures the balance between organic loading and your biomass inventory. Th
Read article →Texas wastewater operators must meet strict TCEQ SSO reporting requirements after any sanitary sewer overflow — no minimum volume, no exceptions. This plain-language checklist cove
Read article →Most Texas wastewater plants submit a DMR to TCEQ every month — but NetDMR reporting is confusing, and TCEQ's own documentation isn't written for operators. This step-by-step guide
Read article →